Patio & decking quotes
Choose patio or decking work according to drainage, ground stability, access and how the space will be used. The job may involve repairing an existing surface, replacing it, or building a new one, with preparation and falls determining whether water, movement and premature decay are avoided.
What this covers
The work starts with measuring the area, checking existing levels and identifying where rainwater will travel. For a patio, the surface may be lifted, the ground excavated, compacted and built up with suitable sub-base, followed by bedding, paving, jointing and edge restraint. Damaged slabs may instead be removed locally if the surrounding base remains sound. Decking usually involves preparing or supporting the ground, setting posts or a suitable frame, allowing for drainage and ventilation, then fixing boards with consistent spacing. Raised decks require particular attention to stability, steps, balustrades and the relationship with doors, thresholds and adjoining surfaces. The scope can also include removing roots, correcting ponding, replacing failed edging, cutting around drainage covers and making good disturbed ground. Existing materials, narrow access and proximity to walls can determine the practical method. A sound specification should distinguish cosmetic renewal from work that corrects movement, damp exposure or inadequate drainage.
How the work is done
The process normally begins with a site assessment covering dimensions, levels, access, existing construction, drainage routes and the condition of adjoining walls or thresholds. The agreed area is marked out before furniture, planting or loose materials are moved. Existing paving, decking, soil or failed sub-base is removed as required, with waste separated and taken away. The ground is then excavated or adjusted, unsuitable material removed, and the formation compacted. For paving, sub-base, bedding material, falls, edge restraints and joints are installed before slabs are laid and checked for level and alignment. For decking, supports, posts or pads, the frame and ventilation gaps are set out before boards, trims, steps and balustrades are fixed. Cuts around covers and boundaries are finished, surfaces are cleaned, and disturbed ground is made good. The final check should cover movement, sharp edges, water flow, door operation, fixings and safe access.
What affects the cost
The main cost drivers are area, excavation depth, ground condition and the quantity of existing patio, decking, roots or concrete requiring removal. Restricted access can increase handling and labour where materials and waste cannot be moved directly. Levels and drainage add work if falls need correcting or water must be redirected without harming neighbouring surfaces. Material choice changes both supply and installation effort: large or fragile slabs need careful handling, while raised decking needs a designed frame, supports, steps and possibly balustrades. Detailed cutting around walls, inspection covers and thresholds also takes longer than open rectangular work. The quotation should identify preparation, sub-base or supports, edging, jointing, fixings, treatment, waste disposal, delivery and making good. Ask which items are provisional and what ground conditions could alter the scope, rather than comparing only the visible surface material.
Before you hire
Useful evidence is a quotation that separates excavation, sub-base, supports, surface materials, drainage, edging and waste disposal rather than describing everything as installation. A capable patio installer can explain the proposed fall and show how it avoids the building. A decking specialist should describe post or support spacing, frame ventilation, board gaps, fixings and access beneath the structure. Look for drawings or measurements where levels are complicated, clear treatment instructions for timber or composite boards, and an explanation of how the finished surface will meet doors, steps, covers and existing paths. Photographs should show construction details, not only completed surfaces.