Insulated plasterboard quotes

Cold internal walls, condensation and high heat loss may justify insulated plasterboard. The work combines plasterboard with an insulation layer, fixed over suitable masonry or framing, then taped, jointed and decorated. The correct thickness and fixing method depend on wall construction, moisture, access and the required thermal improvement.

What this covers

The job usually adds plasterboard bonded to, or used with, a rigid insulation layer against an internal wall. The installer first examines the masonry or frame, removes loose coatings and identifies damp, cracking, unevenness, cables, pipes and ventilation routes. Boards may be fixed with mechanical fasteners, adhesive dabs where suitable, or a separate battened framework when the wall needs levelling or a service cavity.

The board is cut around openings, sockets, switches, pipes and corners. Joints are staggered where the layout allows, edges are supported, and penetrations are sealed or detailed so air movement does not undermine the result. The face is then taped, jointed or skimmed, with corner beads and reveals formed where needed before drying and decoration.

This is not a cure for penetrating damp, rising damp or active leaks. It can also reduce floor area and alter the position of fittings. On separating walls, the chosen build-up may affect sound performance under Part E considerations. Listed or historic properties may need compatible approaches, including lime-based finishes, rather than a standard modern lining.

How the work is done

The installer begins by inspecting the wall and nearby rooms, checking for damp, movement, hollow finishes, uneven masonry and services. Furniture and floor areas are protected, then loose plaster, contaminated material and obstructions are removed. If textured coating or Artex applied before 2000 will be disturbed, it should be tested for chrysotile asbestos before work proceeds.

Next, the tradesperson chooses the build-up and sets out board thickness, joints, openings, skirtings and service positions. The wall may be levelled, sealed, battened or repaired before boards are cut and fixed. Mechanical fixings, adhesive or a framed system are selected according to substrate condition and moisture risk.

Joints, corners and reveals are reinforced, penetrations are sealed, and sockets or pipework are extended safely. The surface is taped, filled or skimmed, then allowed adequate drying time before decoration. Finally, the installer checks for drummy areas, open joints, cracking, uneven reveals and movement at junctions before making good around floors, ceilings and fittings.

What affects the cost

The main cost drivers are wall area, substrate condition and the amount of preparation needed before boards can be fixed. Loose plaster, damp repairs, uneven masonry and difficult access add labour because the installer cannot safely treat the wall as a clean, flat surface.

Specification also changes the price. Thicker insulation, a battened or metal-framed build-up, moisture-resistant boards, acoustic detailing and fire-rated components involve different materials and installation methods. Window reveals, chimney breasts, alcoves, corners and multiple service penetrations increase cutting and finishing time.

A quotation should make clear whether protection, removal of existing finishes, waste disposal, socket and radiator adjustments, skirting removal, plastering, drying, decoration and final making-good are included. Listed-building constraints, asbestos testing where relevant, restricted access and the need to maintain ventilation can add separate stages. Comparing like-for-like build-ups is more useful than comparing a headline board-only figure.

Before you hire

A capable installer can explain why the wall needs dot-and-dab, mechanical fixing or a framed cavity, rather than treating every substrate alike. Ask for a written build-up showing board type, insulation thickness, fixing method, perimeter treatment and service details. Competence is also shown by checking damp before boarding, identifying pre-2000 textured coatings that need testing before disturbance, and allowing drying time before decoration. On an active construction site, CSCS recognition may be relevant to the role and site requirements. For listed or traditionally built property, look for experience with breathable, compatible repair systems rather than standard sealed linings.

Get Insulated plasterboard quotes