Overboarding ceilings quotes

Overboarding a ceiling fixes a damaged, cracked or uneven surface by securing plasterboard over the existing ceiling, then jointing and decorating it. It can conceal minor defects and reduce disruptive removal, but the original ceiling must be checked for movement, moisture, unsafe fixings and textured coatings before covering.

What this covers

The work begins with checking whether the existing ceiling can safely carry a new lining. A tradesperson looks for sagging, loose sections, water damage, movement at joints, weak fixing points and services hidden above. They may open a small inspection area where the construction is unclear. Textured coatings applied before 2000 may contain chrysotile asbestos, so testing is needed before disturbance rather than simply covering an uncertain surface.

Suitable plasterboard is cut around light fittings, vents, hatches and other penetrations. The boards are fixed through the existing ceiling into joists or other reliable supports, using a fixing pattern appropriate to board weight and substrate. Joints are taped and filled, screw heads are covered, edges are sealed and the surface may be skimmed before drying and decoration.

Overboarding is not structural repair. It does not cure a leaking roof, failed plumbing, rotten timber or movement in the building. Those causes need addressing first. The finished ceiling also needs enough clearance for fittings, doors, cornices and ventilation, particularly in older properties with limited headroom.

How the work is done

First, the ceiling is inspected from below and, where practical, above. The tradesperson identifies joist direction, existing fixings, services, damp sources, sagging and any coating that may require asbestos testing. Furniture and floors are protected, and electrical fittings are isolated before being removed or made safe.

Next, the cause of damage is repaired. Loose material is removed or secured, leaks are stopped and weak fixing points are avoided. The board type and thickness are selected, then sheets are measured and cut so joints are supported and openings remain usable.

Boards are lifted into position and fixed through the existing ceiling into joists or suitable supports. Fixings are set flush without breaking the board face. Joints are taped and filled, perimeter gaps are treated as specified, and the surface is skimmed or prepared for decoration.

After drying, the finish is sanded or lightly prepared, sealed and painted. Lights, alarms, vents, cornices and access panels are refitted, with the customer checking that doors, clearances and controls still operate correctly.

What affects the cost

The main cost drivers are the ceiling's size and shape, the number of rooms, working height, roof or floor access, and how easily joists or other reliable supports can be located. A simple, empty rectangular room is less involved than a ceiling with multiple levels, beams, cornice, fitted cupboards, rooflights or awkward stair access.

Costs also change with the condition of the existing ceiling. Loose plaster, water damage, mould, asbestos testing, removal of unsafe material and repairs above the ceiling add work before boarding can begin. Board type, thickness, fire or moisture performance, insulation requirements and the chosen finish affect materials and labour.

The quotation should state protection, isolation and reconnection of fittings, inspection openings, fixings, joint treatment, skim coat, drying allowances, decoration, waste removal and making-good. Check whether scaffolding, towers, specialist access equipment and repairs to the original cause are included, excluded or priced separately.

Before you hire

For this job, useful evidence is a method statement showing how the ceiling will be inspected, supported and fixed rather than simply covered. The tradesperson should be able to explain how joists, services, board joints, access panels and fitting clearances will be handled. Ask how suspected pre-2000 textured coatings will be assessed before disturbance, and how damp or movement will be dealt with first. On an active construction site, relevant CSCS arrangements may matter. A clear written specification should identify board performance, fixing method, finish, drying and making-good.

Get Overboarding ceilings quotes